Enhance Solar Charging with EPEVER 40A MPPT Controller

PRODUCT DESCRIPTION

  • Negative Ground Controller featuring advanced MPPT technology with high tracking efficiency up to 99.5% and peak conversion efficiency of 98%. Maximizing the energy from solar panels to charge your system.
  • MPPT Charge Controller protection built-in against reverse polarity, overcharging, over-discharging, overload, short-circuiting, and reverse current. It protect the battery from being over-charged by the solar modules and over-discharged by the loads.
  • 40A Solar Charge Controller charging process has been optimized for long battery life and improved system performance. It includes a 4-stage battery charging (Bulk, Boost, Float, and Equalization) and temperature compensation increase your battery life and improve your system's performance
  • Solar Controller MPPT support PC software, APP and MT-50. Auto identifying 12V/24V DC system voltage. Also compatible with various Deep Cycle battery options: Sealed, Gel, Flooded and Lithium. Multiple load control method,
  • MPPT Controller 40a with blacklight LCD screen for displacing system information and working condition. Die-cast aluminum design allows for efficient heat dissipation.

SPECIFICATION

Color Tracer4210AN
Brand EPEVER
Voltage 24 Volts
Item Weight 1.9 Kilograms

 

PRODUCT DETAILS

Common Negative Ground MPPT Charge Controller

  • 12V / 24VDC automatically identifying system voltage
  • Rated charge/discharge current: 40A
  • Max Input Power: 12V @ 520W | 24V @ 1040W
  • Max PV open circuit voltage:100VDC ( 92V at 25℃ temperature)
  • Battery type selection: lead-acid (Gel, Sealed, Flooded) and Lithium, voltage parameters can be set on the controller (For the BCV, FCV, LVD, and LVR, users can modify them on the local controller when the battery type is "USE.")
  • Charging Power and Current Limitation Function
  • User programmable for battery types, load control etc.
  • Accurately recognizing and tracking of multiple power point
  • High quality and low failure rate components of ST or IR to ensure the service life
  • Support monitoring and setting the parameters via the APP or PC software
  • Multiple load control modes: manual control, lighting ON/OFF, light On+Timer
  • PV short circuit / PV reverse polarity /Battery over voltage /Battery over discharge / Battery reverse polarity / Load overload protection

Battery type selection: lead-acid (Gel, Sealed, Flooded) and Lithium, voltage parameters can be set on the controller

(For the BCV, FCV, LVD, and LVR, users can modify them on the local controller when the battery type is "USE.")

How to program for Lithium Battery?

  1. Set the battery type via the LCD (LiFePO4(4S/ 8S) and Li(NiCoMn)O2 (3S/6S/7S)V
  2. ia PC (Accessories needed:RS485),V
  3. ia phone APP (Accessories needed:Ebox-Wifi or Ebox-Blue)

Warm tips:

Step: Connect the system in the order of 1.Battery-->2. Load-->3.PV array, and disconnect the system in the reverse order 3. 2. 1.

  • NEVER connect the soalr panel array to the controller Without/Before a Battery.
  • Battery must be connected FIRST !!!
  • DO NOT connect any inverter/ wind/Alternator or Charger into the charge controller!
  • If the remote temperature sensor is not connected to the controller,, the default setting for battery charging or discharging temperature is 25 °C without temperature compensation.
  • The wire size is only for reference. If there is a long distance between the PV array and the controller or between the controller and the battery, larger wires can be used to reduce the voltage drop and improve performance.
  • Would the unit be damaged if the battery polarity is reversed?
  • It is required to connect the battery first, if the battery polarity is reversed in this step, the controller has the protection and would not be damaged. But if the user connects the PV first and then, unfortunately, connects the battery polarity reversed, the controller would be damaged. This is caused by lithium battery characteristics.
  • Can the lithium battery type be chosen via the LCD and button on the controller?
  • Yes, the TracerAN series 10-40A charge controller (softwareSV200 or above version ) supports choosing lithium battery type via LCD. But WiFi/Bluetooth module or PC is required if the user wants to customize the voltage setpoints.
  • Can I set Max. charge current?
  • No such feature, the only way to limit the Max. charge current is to connect fewer solar panels.

MT-50:

  • Compatible with EPever Tracer-A/AN/BN, Triron, XTRA, LS-B/BP, VS-BN series controllers
  • Automatic identify the controller, and display the type, model and relevant parameter data
  • Large-screen multifunction LCD displays all the operational data and system working status
  • Real-time energy statistics recording
  • Longer communication distance based on RS485
  • Diversified load control modes:manual, light ON/OFF, Light ON+ Timer, Time Control.

EPEVER 40A MPPT Solar Charge Controller

Sale price$198.24

Enhance Solar Charging with EPEVER 40A MPPT Controller

PRODUCT DESCRIPTION

  • Negative Ground Controller featuring advanced MPPT technology with high tracking efficiency up to 99.5% and peak conversion efficiency of 98%. Maximizing the energy from solar panels to charge your system.
  • MPPT Charge Controller protection built-in against reverse polarity, overcharging, over-discharging, overload, short-circuiting, and reverse current. It protect the battery from being over-charged by the solar modules and over-discharged by the loads.
  • 40A Solar Charge Controller charging process has been optimized for long battery life and improved system performance. It includes a 4-stage battery charging (Bulk, Boost, Float, and Equalization) and temperature compensation increase your battery life and improve your system's performance
  • Solar Controller MPPT support PC software, APP and MT-50. Auto identifying 12V/24V DC system voltage. Also compatible with various Deep Cycle battery options: Sealed, Gel, Flooded and Lithium. Multiple load control method,
  • MPPT Controller 40a with blacklight LCD screen for displacing system information and working condition. Die-cast aluminum design allows for efficient heat dissipation.

SPECIFICATION

Color Tracer4210AN
Brand EPEVER
Voltage 24 Volts
Item Weight 1.9 Kilograms

 

PRODUCT DETAILS

Common Negative Ground MPPT Charge Controller

  • 12V / 24VDC automatically identifying system voltage
  • Rated charge/discharge current: 40A
  • Max Input Power: 12V @ 520W | 24V @ 1040W
  • Max PV open circuit voltage:100VDC ( 92V at 25℃ temperature)
  • Battery type selection: lead-acid (Gel, Sealed, Flooded) and Lithium, voltage parameters can be set on the controller (For the BCV, FCV, LVD, and LVR, users can modify them on the local controller when the battery type is "USE.")
  • Charging Power and Current Limitation Function
  • User programmable for battery types, load control etc.
  • Accurately recognizing and tracking of multiple power point
  • High quality and low failure rate components of ST or IR to ensure the service life
  • Support monitoring and setting the parameters via the APP or PC software
  • Multiple load control modes: manual control, lighting ON/OFF, light On+Timer
  • PV short circuit / PV reverse polarity /Battery over voltage /Battery over discharge / Battery reverse polarity / Load overload protection

Battery type selection: lead-acid (Gel, Sealed, Flooded) and Lithium, voltage parameters can be set on the controller

(For the BCV, FCV, LVD, and LVR, users can modify them on the local controller when the battery type is "USE.")

How to program for Lithium Battery?

  1. Set the battery type via the LCD (LiFePO4(4S/ 8S) and Li(NiCoMn)O2 (3S/6S/7S)V
  2. ia PC (Accessories needed:RS485),V
  3. ia phone APP (Accessories needed:Ebox-Wifi or Ebox-Blue)

Warm tips:

Step: Connect the system in the order of 1.Battery-->2. Load-->3.PV array, and disconnect the system in the reverse order 3. 2. 1.

  • NEVER connect the soalr panel array to the controller Without/Before a Battery.
  • Battery must be connected FIRST !!!
  • DO NOT connect any inverter/ wind/Alternator or Charger into the charge controller!
  • If the remote temperature sensor is not connected to the controller,, the default setting for battery charging or discharging temperature is 25 °C without temperature compensation.
  • The wire size is only for reference. If there is a long distance between the PV array and the controller or between the controller and the battery, larger wires can be used to reduce the voltage drop and improve performance.
  • Would the unit be damaged if the battery polarity is reversed?
  • It is required to connect the battery first, if the battery polarity is reversed in this step, the controller has the protection and would not be damaged. But if the user connects the PV first and then, unfortunately, connects the battery polarity reversed, the controller would be damaged. This is caused by lithium battery characteristics.
  • Can the lithium battery type be chosen via the LCD and button on the controller?
  • Yes, the TracerAN series 10-40A charge controller (softwareSV200 or above version ) supports choosing lithium battery type via LCD. But WiFi/Bluetooth module or PC is required if the user wants to customize the voltage setpoints.
  • Can I set Max. charge current?
  • No such feature, the only way to limit the Max. charge current is to connect fewer solar panels.

MT-50:

  • Compatible with EPever Tracer-A/AN/BN, Triron, XTRA, LS-B/BP, VS-BN series controllers
  • Automatic identify the controller, and display the type, model and relevant parameter data
  • Large-screen multifunction LCD displays all the operational data and system working status
  • Real-time energy statistics recording
  • Longer communication distance based on RS485
  • Diversified load control modes:manual, light ON/OFF, Light ON+ Timer, Time Control.
Style: Tracer4210An